事实上,当你看到这些错误提示时,其实并不要紧张,这是你所要做的便是----等待.BT会自动重试（无论这种情况是出现在开始还是下载过程中）并排除错误。


I. A piece failed hash chech, re-downloading it

这并不是什么坏消息,你不用理会它.意思是告诉你,你下载的文件有一部分是坏的,bt会自动帮你重新下载错误的部分.导致这个错误的大多数原因在于某些人错误的使用了"跳过hash检查"这个选项

II.bad data from tracker -

通常你不必理会它,通常是tracker服务器过载或者down了.
:P

III.Problem connecting to tracker - timeout exceeded
Problem connecting to tracker - HTTP Error 503: Connect failed
Problem connecting to tracker - [Errno socket error] (10061, "Connection refused")
Problem connecting to tracker - (111, `Connection refused`)

说明在连接tracker服务器过程中出现错误,有可能trakker服务器过载或者down了,这时并不要心急,等待BT自动重试.如果很长时间都没有反映的话,你可以加上"--http_timeout 120"的参数来加大连接重试时间.具体做法另文说明.

IV.Problem connecting to tracker - HTTP Error 400: Not Authorized

说明这个tracker服务器不允许你使用这个torrent文件(国内好像比较少见),有些tracker服务器只允许在他们自己网站上发布的torrent才允许下载.解决只有换一个torrent文件了,:P

V.Problem connecting to tracker - HTTP Error 404: Not Found

很简单,torrent文件在tracker服务器上已经找不到了,找个新的吧.

VI.Problem connecting to tracker - HTTP Error 407: Proxy Authentication Required

假如你用的是代理下载BT,说明这个代理需要验证,需要你输入用户名和密码.

VII.Problem getting response info - [Errno 2] No such file or directory: "C:\\Documents and Sett..."

　　在某些情况下,IE有可能没把torrent文件存在临时文件夹内.解决方法是在torrent文件下载地址上按右键,然后另存到硬盘的某处(这可是个好习惯,以后你求种子或者reseed的时候特别有用,建议大家都这么干,利己利人),然后双击这个torrent文件开始下载.如果出现这个问题,建议清楚你的IE缓存,在文件中如果出现"["或者"]"也会出现这个问题.

以下是其中包含了最常见的TCPIP error
部分已加上中文注解,希望对大家遇到的问题有帮助.

tcpip error list

case 10004 error = Interrupted system call 中断的系统呼叫; break;
case 10009 error = Bad file number; break;
case 10013 error = Permission denied 进入被拒绝; break;
case 10014 error = Bad address; break;
case 10022 error = Invalid argument (not bind); break;
case 10024 error = Too many open files; break;
case 10035 error = Operation would block; break;
case 10036 error = Operation now in progress; break;
case 10037 error = Operation already in progress; break;
case 10038 error = Socket operation on non-socket; break;
case 10039 error = Destination address required; break;
case 10040 error = Message too long; break;
case 10041 error = Protocol wrong type for socket; break;
case 10042 error = Bad protocol option; break;
case 10043 error = Protocol not supported 不支援的protocol; break;
case 10044 error = Socket type not supported; break;
case 10045 error = Operation not supported on socket; break;
case 10046 error = Protocol family not supported; break;
case 10047 error = Address family not supported by protocol family; break;
case 10048 error = Address already in use socket使用中; break;
case 10049 error = Can't assign requested address; break;
case 10050 error = Network is down; break;
case 10051 error = Network is unreachable; break;
case 10052 error = Net dropped connection or reset; break;
case 10053 error = Software caused connection abort; break;
case 10054 error = Connection reset by peer 连接被防火樯或proxy中断; break;
case 10055 error = No buffer space available Tracker的buffer已满; break;
case 10056 error = Socket is already connected; break;
case 10057 error = Socket is not connected; break;
case 10058 error = Can't send after socket shutdown; break;
case 10059 error = Too many references, can't splice; break;
case 10060 error = Connection timed out 与Tracker连线超时; break;
case 10061 error = Connection refused Tracker否决连接; break;
case 10062 error = Too many levels of symbolic links; break;
case 10063 error = File name too long 档案名过长或含无效的字完; break;
case 10064 error = Host is down; break;
case 10065 error = No Route to Host; break;
case 10066 error = Directory not empty; break;
case 10067 error = Too many processes; break;
case 10068 error = Too many users 太多使用者; break;
case 10069 error = Disc Quota Exceeded; break;
case 10070 error = Stale NFS file handle; break;